Contechs VOIP Components…
-
Product Name: Arrestor Magazine 3 Point Protection of Connectiont Mudule
CS-VDMAM-10
Arrestor Magazine 3 Point Protection of Connectiont Mudule
This Arrestor Magazine holds up 10,3-pole arrwstors for 3 point protection of Connection Mudules. The surg capacity of Connection Mudules is 10kA per wire/contact. Supplied with a clear cover to prevent contact with TVN (Telecommunications Network Voltage).
-
Product Name: Connection Tool for Connection Mudule
CS-VDMCT
Connection Tool for Connection Mudule
Used to terminated and cut wire on all Connetion Mudules and RJ outlets.The sensor ensures full insertion and termination of the conductor. The sensor also helps with double jumpering, by sensing correct position for the second wire befor cutting. Used to terminate wire with a diameter of 0.4 – 0.9mm and insulation of 0.7 – 1.9mm.
-
Product Name: Backmount Frames 19″ Connection Mudule
CS-VDMF19-150
Backmount Frames 19" Connection Mudule
Backmount Frames for 19″ rack mounting. Capable of holding 5 to 15 Connections Mudules.
-
Product Name: Backmount Frames for Connections Mudule
CS-VDMF-10-100
Backmount Frames for Connections Mudule
Backmount frames used for the mounting of Connections Mudule. These frames have the capacity to accommodate 1,3,5 and 10 module respectively.
-
Product Name: Disconnection Mudule 10 incoming 10 outgoing pairs
CS-VDM-10
Disconnection Mudule 10 incoming 10 outgoing pairs
Disconnection Mudule 10 incoming 10 outgoing pairs. Pairs numbered 1-0. Disconnect contact used for opening the circuit. Test is possible in both directions. Can accept 3 or 5 point protections elemants. Includes one set of plug numbers 1-0 and 10-100, for mounting on backmount frames.
