Contech Solutions, Lowest TCO for physical layer solutions of Copper, Fiber, Coaxial, Network Cabinets and components, Backmount Frames for Connections Mudule

Lowest TCO for physical layer solutions of Copper, Fiber, Coaxial, Network Cabinets and components.

Backmount Frames for Connections Mudule

Part No: CS-VDMF-10-100.

Backmount frames used for the mounting of Connections Mudule. These frames have the capacity to accommodate 1,3,5 and 10 module respectively.

Backmount frames used for the mounting of Connections Mudule. These frames have the capacity to accommodate 1,3,5 and 10 module respectively.

Product Name: Connection Tool for Connection Mudule

CS-VDMCT

Connection Tool for Connection Mudule

Used to terminated and cut wire on all Connetion Mudules and RJ outlets.The sensor ensures full insertion and termination of the conductor. The sensor also helps with double jumpering, by sensing correct position for the second wire befor cutting. Used to terminate wire with a diameter of 0.4 – 0.9mm and insulation of 0.7 – 1.9mm.
Product Name: Category 3 Multipair Cables

CS-C3UXXX

Category 3 Twisted Multipair 10 - 100 Pair
Product Name: Switchboard & Digital Telecommunication Cable

CS-TPIFXX-XX

PVC-Insulated Indoor Switchboard & Telecommunication cable

PVC-Insulated Indoor Switchboard & Telecommunication cable
Product Name: Category 5e U-UTP Cable

CS-C5U4

Category 5e U-UTP Cable

4 Pair Solid 24 awg Cat 5E 100 MHz Un-Shielded U/UTP PVC Cable.