Product Description
10 to 200 Pair 24AWG/0.51mm solid bare copper, polyolefin insulated, twisted pair , Overall foil shield and water blocking tape protected with drain wire ripcord, PVC Cable.
Switchboard & Digital Telecommunication Cable
PVC-Insulated Indoor Switchboard & Telecommunication cable
Related Products
-
Product Name: Disconnection Mudule 10 incoming 10 outgoing pairs
CS-VDM-10
Disconnection Mudule 10 incoming 10 outgoing pairs
Disconnection Mudule 10 incoming 10 outgoing pairs. Pairs numbered 1-0. Disconnect contact used for opening the circuit. Test is possible in both directions. Can accept 3 or 5 point protections elemants. Includes one set of plug numbers 1-0 and 10-100, for mounting on backmount frames.
-
Product Name: Arrestor Magazine 3 Point Protection of Connectiont Mudule
CS-VDMAM-10
Arrestor Magazine 3 Point Protection of Connectiont Mudule
This Arrestor Magazine holds up 10,3-pole arrwstors for 3 point protection of Connection Mudules. The surg capacity of Connection Mudules is 10kA per wire/contact. Supplied with a clear cover to prevent contact with TVN (Telecommunications Network Voltage).
-
Product Name: Backmount Frames for Connections Mudule
CS-VDMF-10-100
Backmount Frames for Connections Mudule
Backmount frames used for the mounting of Connections Mudule. These frames have the capacity to accommodate 1,3,5 and 10 module respectively.
-
Product Name: Multi-Pair Non Conductive water-blocking Tape -AL Foil Shielded Cable
CS-TPIF05---
Multi-Pair Non Conductive water-blocking Tape -AL Foil Shielded Cable
The cables are designed to handle low frequency signals for short range applications suitable for cross connecting individual items of switchboard equipment and to connect exchanges with internal distribution points. The cables are intended to be terminated in Insulation/displacement Connectors (IDC).
